Src Helical Gear Reduction Gearbox

• Application: Industry
• Hardness: Hardened
• Installation: Horizontal Type
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SRC01-SRC04
• Layout: Coaxial
• Gear Shape: Conical - Cylindrical Gear
• Step: Double-Step
• Type: Non-Circular Gear
• Input Speed: 1400rpm
• Power: 0.12kw-4kw
• Output Torque: 3-601 N.M
• Model: Src01/Src02/Src03/Src04
• Transmission: Helical
• Reduction: Two-Staged
• Warranty: One Year and Free Technical Support
• Coupled Flange Type: B5 or B14
• Customised: Available for Flange and Shaft
• Foot Mounted: Available to Request
• Transport Package: 1 Set / Carton, Several Cartons / Wooden Pallet
• Specification: ISO9001
• Trademark: Chenxin
• Origin: Zhejiang Taizhou
• HS Code: 8483409090
• Production Capacity: 10000 Per/Month
• Package Size: 14.50cm * 10.00cm * 13.00cm
• Package Gross Weight: 4.000kg

Product Description

Features for SRC helical gearboxes reducers,
1.Larger output torque,stable transmission with lower noise,
2.Ommibearing installation available,
3.Aluminium alloy diecast,
4.Customising available for flange or shaft
 
Important information for SRC helical gear speed reducers, 
 

Input coupling	Flange and shaft
Output coupling	Flange and shaft
Foot mounted	Available for Motovario and Bonfiglioli foot mounted specs. The letter,B in the data sheet of foot code is for Bonfiglioli and M for Motovario
Range of reduction ratios	3.74---51.30
Motor power coupled	0.12---4KW
Version	1.Flange coupled,shaft output,with foot mounted,marked as SRC...P   2.Shaft coupled and output,with foot mounted,marked as SRC...HS     3.Flange coupled,shaft output,no foot mounted,marked as SRCZ...P   4.Shaft coupled and output,no foot mounted,marked as SRCZ...HS   5.Flange coupled and output,no foot mounted,marked as SRCF...P   6.Shaft coupled,flange output,no foot mounted,marked as SRCF...HS

Note recommendations
To install the reduction unit it is necessary tonote the following recommendations:
1. Check the correct direction of rotation of thereduction unit output shaft before fitting the unit tothe machine.
2. Before mount with the prime moveanddevice,please check the reducers every axiadiameter, aperture,key and key slot, 
    to be theirdimensions are not deviation, and avoidassembaurtoo tight or too loose, unless it wilinfluence the reducer's performance.
3. The mounting on the machine must be stableto avoid anv vibration.
4.Whenever possible,protect the reductiorunit against solar radiation and bad weather.
5.In the case of particularly lengthy periods ofstorage (4-6 months), if the oil seal is not immersedin the lubricant inside the unit.
   It is recommended tochange it since the rubber could stick to the shaft ormay even have lost the elasticity it needs to functionproperly.
6.Painting must definitely not go over rubberparts and the holes on the breather plugs, if any.
7.When connect with hollow or solid shaftplease grease the joint to avoid lock or oxidation.
8.Check the correct level of the lubricantthrough the indicator, if there is one.
9. Starting must take place gradually, withoutimmediately applying the maximum load
10. Supporting unit is required when usingvarious of reducer matched with motor directiy andthe wsight of motor is a little bigger than common.
11 .Ensure the motor cools correctly byassuring good passage of air from the fan side.
12. In the case of ambient temperatures<-5°Cor>+40°C call the Technical Service.