G3FM Head Parts Gearmotor

• Input Speed: 1400rpm
• Speed Ratio: 30
• Output Speed: 47rpm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: G3FMH
• Output Torque: 72.3n.M
• Output Shaft Dia: 28mm
• Size: 186*199*199
• Weight: 4kg
• Color: Blue/Gray
• Quality Guarantee: One Year
• Certificate: ISO9001:2008
• Transport Package: 1 PC / Carton; Several Cartons / Wooden Pallet
• Specification: ISO7
• Trademark: chenxin
• Origin: Zhejiang, China (Mainland)
• HS Code: 8483409090
• Production Capacity: 25000set / Month

Product Description

SpecificationsOur G3 helical gear motor products using advanced production technology. is reach the small deformation,high precision,low noise and smooth running

Model & Mark :G3FMH-1:30-28mm

G3	Model code
F/L	Mount mode F:Flange mounted L:Foot mounted
M/B/S	Power mode M:Standard model(motor without brake) B:Brake model (motor with brake) S:IEC input  Without character means shaft input
1:30	Speed ratio of reducer (i=5,10,15,20~~~200)
28mm	Output shaft Diameter (18,22,28,32,40,50mm)

 

Power kw	Output shaft	Ratio	Primary outline and dimension-mount
			A	B	C	F	I	J	L	M	N	O	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1	Z
0.37	22	5/10/15/20/25	182	110	130	164	11	19	4.5	185	160	4	12	40	148	47	22	14	24.5	16.3	6	5	201	89.5	99	M8
	28	30/40 50/60 80/100	198	110	130	186	11	23.5	4.5	215	160	4	15	45	170	50	28	14	31	16.3	8	5	198.5	105.5	103.5	M8
	32	100/120 160/200	217	110	130	215	13	28.5	4.5	250	160	4	15	55	180	60	32	14	35	16.3	10	5	234	126	108.5	M8

 

Performance parameter
Normal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		22mm					28mm						32mm
	actual speed ratio		4.86	9.71	15.27	19.43	24.29	30	38.96	48.29	58.22	79.48	98.51	98.29	121.56	158.48	202.5
	rpm		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	NM	50Hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
		60Hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2		245

 

Output torque of IEC input reducer
Normal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.37kw	Output shaft		22mm					28mm						32mm
	NM	50Hz	11.9	23.1	35.7	47.6	60.5	72.3	93.2	116	138.8	185.3	191.3	231.9	278.5	370.7	427.2
		60Hz	9.9	19.2	29.7	39.6	50.4	60.3	77.6	96.6	115.6	154.4	159.4	193.3	232.2	308.9	356

Quantity of lubricant
output shaft dia	18mm	22mm	28mm	32mm	40mm	50mm
quantity of lubricant	140	200	400	600	900	1600

 

Defective reason		analysis	Solution method
Noise	Knocking	Gear surface damaged	Contact manufacturer,replace gear set
	Continual cacophony	Bearing damaged	Replace the damaged bearing
	Periodical cacophony	Particle on gear surface	Check gear surface
	Neigh	Lack of lubricant	Fill with lubricant
	Intermittent cacophony	Dirty lubricant	Replace the new lubricant
Shake	Fixed foundation shake	Deflective mount on the surface	Re-adjust fixed pedestal
	Output shaft shake	Bearing damage	Replace the damaged bearing
	Inner gear parts shake	Gear damage	Replace the damaged gear
	Housing shake	Defective gear assembly	Re-adjust the gear set
Leakage	Oil seal leakage	Oil seal vulcanize	Replace the damaged oil seal
	Housing leakage	Housing with the sand hole	Replace housing with the sand hole
	Housing shake	O-ring damaged	Replace the damaged O-ring
Over-heating	Oil seal damaged	Over-tighten oil seal	Replace over-tighten oil seal
	Over-heat housing	Over-road	Re-calculate load
	Lack of lubricant	Low lubricant	Fill with lubricant
	Over-heat motor	1,the temperature of environment is too high 2,airiness is bad 3,pressure is too high or too low	1,take measure to reduce the temperature 2,clean out the wind passage and check the motor if cooling fan has been damaged 3,adjust electrical source pressure
The motor can`t work		Electrical source haven`t been switched on	Check if the switch is contacted will,if the fuse wise is broken or the motor down-lead is broken
The rotate speed of the output shaft is too low		Wrong control connection outside Over loading Wrong ratio Electrical source pressure too low Over-load	Correct is on the right connection Reduce the load Check the rotation ratio of the cooling fan and output shaft by hand Adjust electrical source pressure  Reduce load
Motor circumrotate,output shaft don`t circu mrotate		Inner gear set damaged	Please contact the manufacture to replace the gear set